Lucent Technologies PARTNER II Release 4.1 Programming And Use Instructions page 130

Programming
To change the Automatic VMS Cover setting for an extension:
1 . Press [
Feature
2 . Enter the number of the extension to be covered by the voice messaging
system. For example, to program extension 11, press [
3 . To assign or unassign Automatic VMS Cover, press [
appropriate value displays.
To program another extension, press [
4 .
number shows on the display. Then repeat Step 3.
Select another procedure or exit programming mode.
5 .
] [ ] [ ] [ ] [
0 0 System Program System Program
] [ ] [ ] [ ] [ ].
# 3 1 0
] [ ].
1 1
] until the
Next Data
] or [ ] until the extension
Next Item Prev Item
Automatic VMS Cover (#310)
5-33