Aa Extensions (#607) - Lucent Technologies PARTNER II Release 4.1 Programming And Use Instructions

AA Extensions (#607)

Description
This System Programming procedure lets you identify extensions where
PARTNER Attendants are connected to the system. Doing so lets the system
notify users with display phones when they are receiving a call that has been
transferred from the PARTNER Attendant. (This procedure applies only to
PARTNER Attendants—do not use it with the Automated Attendant Service of a
voice messaging system.)
Related Features
For each PARTNER Attendant extension, use Transfer Return Extension
(#306) to identify the extension to which a call should be routed if the
destination extension does not answer.
Set Automatic Extension Privacy (#304) to Not Assigned for the PARTNER
Attendant extension if you want to be able to intercept calls routed to the
device.
Considerations
Chapter 4 provides information on using PARTNER Attendants with the
system.
On system display phones, "AA" or "Automated Attendant" displays when a
call is being transferred from a PARTNER Attendant. "Transfer from AA" or
"Transfer from Auto Att" displays when a call transferred by a PARTNER
Attendant was not answered and is being returned to your extension.
Valid Entries
1 = Assigned
2 = Not Assigned
Programming
To identify an extension where a PARTNER Attendant is installed:
1 . Press [
Feature
2 . Enter the extension number to which the PARTNER Attendant is connected.
For example, to select extension 27, press [
To assign or unassign the extension, press [
3 .
displays.
4 . To assign or unassign a second PARTNER Attendant extension, press
[
Next Item
repeat Step 3.
5 . Select another procedure or exit programming mode.
] [ ] [ ] [
0 0 System Program
] or [ ] until the extension number shows on the display. Then
Prev Item
] [ ] [ ] [ ] [ ] [
System Program # 6 0
] [ ].
2 7
] until the appropriate value
Next Data
AA Extensions (#607)
].
7
5-3