Lucent Technologies PARTNER II Release 4.1 Programming And Use Instructions page 302

Programming
To program a Wake Up Service button at extension 10:
1. Press [
Feature
2. At this point:
If you want to assign Wake Up Service to the first available button,
press [
Wake Up Service Button
1 Assigned - Ext10
If you want to remove the Wake Up Service button assignment, press
[
Next Data
Wake Up Service Button
2 Not Assigned
If you want to assign Wake Up Service to a specific button, press [
display similar to the following appears:
Wake Up Service Button
3 Select a Button
Then press a programmable button with lights to assign Wake Up Service
to that button.
3. Select another procedure or exit programming mode.
4. Label the Wake Up Service button at extension 10.
Using
To schedule a wake up call for a specific extension:
1. Press the Wake Up Service button at extension 10.
The green light next to the Wake Up Service button flutters. Wake Up
Service is activated and a display similar to the following appears:
Wake Up Call
2. Dial the two-digit extension number of the desired extension (or use an Auto
Dial button). For example, to schedule a wake up call for extension 32,
press [
3
Wake Up Call 32 --:--
3. Enter the wake-up time in 24-hour notation. For example, to set the time to
2:15 p.m., press [
display similar to the following appears:
Wake Up Call 32 14:15
The wake up call is scheduled, and the green light next to the Wake Up
Service button turns off.
] [ ] [ ] [ ] [
0 0 System Program
] until a display similar to the following appears:
Next Data
] until a display similar to the following appears:
] [ ]. A display similar to the following appears:
2
] [ ] [ ] [ ]. When you have finished entering the time, a
1 4 1 5
] [ ] [ ] [ ] [
System Program # 1 1 5
Wake Up Service Button (#115)
].
]. A
3
5-205