Lucent Technologies PARTNER II Release 4.1 Programming And Use Instructions page 242

Programming
To identify the types of outgoing calls that can be made on all lines at an
extension:
Press [
1.
Feature
At the Extension: prompt, enter the number of the extension to be
2.
programmed. For example, to select extension 30, press [
3. To change the type of call restriction, press [
value displays.
4. To program another extension, press [
number shows on the display. Then repeat Step 3.
5. Select another procedure or exit programming mode.
] [ ] [ ] [ ] [
0 0 System Program System Program
Outgoing Call Restriction (#401)
] [ ] [ ] [ ] [ ].
# 4 0 1
] [
3
] until the appropriate
Next Procedure
] or [ ] until the extension
Next Item Prev Item
].
0
5-145