Disallowed List Assignments (#405) - Lucent Technologies PARTNER II Release 4.1 Programming And Use Instructions

Disallowed List Assignments (#405)

Description
This System Programming procedure lets you assign up to four Disallowed
Phone Number Lists to specified extensions.
Related Features
You must use Disallowed Phone Number Lists (#404) to create the lists of
disallowed telephone numbers before you use this procedure.
Considerations
When a Disallowed Phone Number List is assigned to an extension, the list
applies to all lines to which the extension has access.
Valid Entries
1 = Assigned to extension
2 = Not Assigned to extension
Programming
To assign Disallowed Phone Number Lists to an extension:
Press [
1.
Feature
2.
Enter the number of the extension to be programmed. For example, to
program extension 27, press [
appears:
Disallow To 27
List Number:
3. Enter the list number (1–4). For example, to select list 1, press [
4. To assign or unassign the list, press [
displays.
5. At this point:
To assign or unassign another list for this extension, press [
[
Prev Item
To program another extension, press [
begin at Step 2.
6. Select another procedure or exit programming mode.
5-70 Disallowed List Assignments (#405)
] [ ] [ ] [ ] [
0 0 System Program
] [
2 7
] until the list number shows on the display. Then repeat Step 4.
] [ ] [ ] [ ] [
System Program # 4 0
]. A display similar to the following
] until the appropriate value
Next Data
] [
Next Procedure Prev Procedure
].
5
].
1
] or
Next Item
] and