Lucent Technologies PARTNER II Release 4.1 Programming And Use Instructions page 125

If Automatic System Answer Mode is set to Hold or Disconnect, you can
intercept a call while the message is playing—the light for the call will be
steady red. To intercept the call, press the line button and lift the handset.
The message will stop playing when the call is retrieved.
If Automatic System Answer Mode is set to Ring, the line button on which an
outside call rings shows green flash continuously, even while the system
answers the call and plays the Automatic System Answer greeting. To
answer the call, lift the handset. If the message was playing, it stops
automatically.
Valid Entries
1 = Hold
2 = Disconnect
3 = Ring
Programming
To change the Automatic System Answer Mode:
1. Press [
Feature
To change the mode, press [
2.
see "Valid Entries."
3. Select another procedure or exit programming mode.
5-28 Automatic System Answer Mode (#121)
] [ ] [ ] [ ] [
0 0 System Program System Program
Next Data
] [ ] [ ] [ ] [ ].
# 1 2 1
] until the appropriate value displays—