Table of Contents
Advertisement
Dial Mode (#201)
Description
This System Programming procedure identifies individual lines as touch-tone or
rotary. You should check with your local phone company if you are not sure
which type of line is being provided to you.
Related Features
If you are having difficulty using touch-tone phones on rotary lines, you may
need to adjust the Rotary Dialing Timeout (#108).
If the system has rotary lines, you can use Touch-Tone Enable to send
touch-tone signals over a rotary line (for example, to access bank-by-phone
services).
Valid Entries
1 = Touch-Tone line
2 = Rotary line
Programming
To change the Dial Mode setting for a specific line:
1.
Press [
Feature
2.
Enter the first line to be programmed. For example, to program line 8, press
[
] [
].
0
8
3.
To change the dial mode, press [
4.
To program another line, press [
shows on the display. Then repeat Step 3.
5.
Repeat Steps 3 and 4 for all lines that you want to change.
6.
Select another procedure or exit programming mode.
5-58
Dial Mode (#201)
] [
] [
] [
] [
0
0
System Program
System Program
Next Data
Next Item
] [
] [
] [
] [
].
#
2
0
1
] until the appropriate value displays.
] or [
] until the line number
Prev Item
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the PARTNER II Release 4.1 and is the answer not in the manual?