Lucent Technologies MERLIN LEGEND Release 6.0 Maintenance And Troubleshooting Manual page 32

MERLIN LEGEND Communications System Release 6.0
Maintenance and Troubleshooting 555-660-140
Introduction
Using SPM
Console Display/Instructions
Enter the password.
! 
Select an option.
! 
NOTES:
1. If you do not know the password, check the System Information
2. You can change the password without knowing the old
Networked Systems
In Release 6.0 and later systems, where systems are networked and only one
system has public switched networked trunks, you must use this method in
order to access SPM on networked systems. The Remote Access code of the
switch you are reaching must be programmed into the non-local dial plan of the
system from which you are calling. Remote Access codes must be unique and
unambiguous for all networked systems.
Report or ask to speak with the system manager.
password only when you perform on-site maintenance through
the ADMIN jack.
Additional Information
Type the remote access password.
The password you enter does not
appear as you type it.
Press one of the function keys.
Issue 1
February 1998
Page 1-12
PC