MERLIN LEGEND Communications System Release 6.0
Maintenance and Troubleshooting 555-660-140
Control Unit Problems
800 NI-BRI Module Problems
Console Display/Instructions
Q
vvvtÃyÃYY)
6Ãyrhà ÃyvrÃÃPF
YYYYYÃÃÃ
ÃÃÃ
ÃÃÃ
ÃÃÃ
@v
The communication paths' result codes are ordered as follows on lines 3
through 6:
1
5
9
13
Communication paths correspond to the following ports on the 800
NI-BRI module:
PATHS
In Release 4.1 and later systems, the following screen appears when the
testing for all 16 communication paths is completed. On a module with
fewer than 16 administered paths, the screen shows
described in
paths; and
proceeding, record all the result codes on this screen, in the correct
order.
Q
vvvtÃyÃ)
ÃÃÃ
ÃÃÃ
ÃÃÃ
ÃÃÃ
@v
2
3
6
7
10
11
14
15
PORT
Table 4–7
for all successful paths; error codes for all failed
for any path that was not administered. Before
Additional Information
Ã
xx
= slot number entered in Step 2
Lines 3 through 6 will contain at
least one error message.
See
Table
4–7.
4
8
12
16
PATHS
PORT
Ã
xx
= slot number entered in Step 2
Lines 3 through 6 will contain the
test result codes.
See
Table
4–7.
Issue 1
February 1998
Page 4-81
PC
or
Need help?
Do you have a question about the MERLIN LEGEND Release 6.0 and is the answer not in the manual?