Ni-Bri Module Problems - Lucent Technologies MERLIN LEGEND Release 6.0 Maintenance And Troubleshooting Manual

MERLIN LEGEND Communications System Release 6.0
Maintenance and Troubleshooting 555-660-140
Control Unit Problems

800 NI-BRI Module Problems

Select and repeat the upgrade procedure, being careful to select the
correct slot.
Board Memory Programming Failure
Repeat the upgrade procedure. If the upgrade continues to fail after several
attempts, the module should be replaced. See
4–61.
800 NI-BRI Module Problems
An 800 NI-BRI module requires running the provisioning test, in addition to the
other module tests, under the following circumstances:
The module has data endpoints that use the BRI lines.
Voice Call manual testing of the module's BRI lines indicates problems.
The test described in this document supports the NI-1 BRI IOC Package "S"
service configuration. Multiline-Hunt Group/Series Completion testing is
included here.
See Figure 4–6
any questions about the 800 NI-BRI module and do not find the answers here,
contact NSAC at 1 800 628-2888.
‰‰
for a diagram of the entire module testing process. If you have
xx = slot selected in Step 3.
"Replacing Modules" on page
Issue 1
February 1998
Page 4-75
Ç