MERLIN LEGEND Communications System Release 6.0
Maintenance and Troubleshooting 555-660-140
Central Office and Network Problems
Conclusion of Hardware Maintenance
Figure 5–4.
Installing the Control Unit Housing (Release 2.0 and Earlier)
Line up the wire clips attached to the carrier with the recesses on
!
the outside of the side panels. See
If the wire clips are not attached to the control unit, see "Installing the
Housing Clips" in Chapter 2 of Installation .
Push the panels back until the clips hook over the tabs and rest in
!
the recesses.
Slide housing cover
forward into clips
Figure
5–4.
Issue 1
February 1998
Page 5-76
Need help?
Do you have a question about the MERLIN LEGEND Release 6.0 and is the answer not in the manual?