AT&T MERLIN LEGEND Release 3.1 Maintenance And Troubleshooting Manual page 166

800 NI-BRI Module Problems
Time Estimate
Interrupting the Test
Test Failure
Restore
To run the Provisioning Test, follow the steps below.
NOTE:
Before proceeding with this test, have available completed copies of System
Planning Form 3–i, Incoming Trunks : BRI Options and the NI-1 BRI Planner
Form .
Console Display/Instructions
1 From the main menu, select the Slot option.
_
4–76
Control Unit Problems
Approximately 20 minutes for a fully utilized board.
However, communication paths with errors will
increase the time. Boards with fewer administered
lines and no errors will decrease the time.
Interrupt the test by selecting
If the test fails, follow the instructions in Tables 4–6
and 4–7. If the module must be replaced, record
the errors on the repair tag and replace the module.
Restore the module when it completes all module
tests. is in the Slot menu, which you can
access by doing the following from the console:
Menu
See "Restore," earlier in this chapter, for additional
information.
Additional Information
.
PC
2