AT&T MERLIN LEGEND Release 3.1 Maintenance And Troubleshooting Manual page 143

Module Problems
To run the Board Controller Module Test, use the following steps.
Console Display/Instructions
1 From the Maintenance menu, select the Slot option.
_
2 Specify the slot number ( nn = 00 to 17).
3 Select Demand Test.

For all MLX modules,
screen. For 100D modules,
displayed as options on this screen. For all 800 NI-BRI modules,
and
Additional Information
Dial or type [ nn ], then select
_
xx = slot number entered in Step 2
_
is also displayed as an option on this
- , , and
are also displayed as options on this screen.
Control Unit Problems
PC
2
.
0
6
are also
,
4–53