AT&T MERLIN LEGEND Release 3.1 Maintenance And Troubleshooting Manual page 73

Error Logs
Table 2–2 Continued
Error
Codes Description
If this error occurs 4 times
consecutively, and if Automatic
Maintenance-Busy is enabled and
the 50% maintenance-busy limit has
not been exceeded, the trunk is
busied-out automatically.
Communication problems between
the processor and the modules. The
module received an unrecognized
message from the processor.
The module that occupies the
indicated slot does not match the
slot information contained in the PC
or PCMCIA card backup file.
Write to the memory card is not
succeeding or is too slow.
Erasure of the memory card is not
succeeding or is too slow.
Action
Turn power off for at least 1 second and
then turn it on. Repeat system
programming procedure. If problem
persists, replace the module.
Turn the processor off and then on.
Repeat system programming procedure.
If the problem persists, replace the
module.
Troubleshoot the slot descriptions in
your backup file against the actual
system modules that occupy those
slots. After the mismatch is corrected,
repeat the restore operation.
Reset the card and try again. Replace
the card if the problem persists and
try again. If the problem persists,
replace the processor.
Reset the card and try again. Replace
the card if the problem persists and
try again. If the problem persists,
replace the processor.
Error Logs, Access Logs, and System Inventory
Continued on next page
2–21