Module Problems
Console Display/Instructions
5 Select the firmware to be programmed.
6 Select Yes.
_
If the firmware selected provides functionality that is different from the circuit
module's current firmware, the Maintenance display indicates that a Board
Renumber will be required once the installation is complete.
_
If the module Busy-Out is blocked by an active line or extension, the following
screen appears.
4–68
Control Unit Problems
xx = slot number entered in Step 3
Line 2 displays the firmware version
currently installed on the module.
_
_
Lines 4, 5 and 6 display firmware
_
versions available on the memory
card.
If an angle bracket (>) appears in the
upper right corner of the screen, you
may select More to display the next
screen with additional firmware versions
available on the memory card.
xx = slot number entered in Step 3
xx = slot number entered in Step 3
Additional Information
PC
7
8
9
u
3
3