2
Hardware Installation
2.5.5 Universal Serial Bus Ports
USB 2
USB 1
USB 4
USB 3
The system board supports 8 USB 2.0/1.1 ports. USB allows data
exchange between your computer and a wide range of
simultaneously accessible external Plug and Play peripherals.
Four onboard USB 2.0/1.1 ports (Black) are at locations CN7 and
CN8 of the system board.
J13 (USB 5/6) and J14 (USB 7/8) connectors allow you to connect
4 additional USB 2.0/1.1 ports. One of these connectors allows
you to connect to the 2 USB ports that are on the FrontX de-
vice. (The FrontX device, which comes with LANPARTY series
products, must be installed into a drive bay of the chassis.) Con-
nect the USB cable connector from FrontX to J13 or J14. Make
sure pin 1 of the cable connector is aligned with pin 1 of J13 or
J14.
38
USB 5-6
10
2
9
1
USB 7-8
2
1
10
9