Table of Contents
Advertisement
3
BIOS Setup
Restoring a Configuration
To restore one of the previously saved configurations, move the
cursor to "Load" of "User Define Config 1" then press <Enter>.
The message below will appear.
Renaming a Configuration
The default name given in the "User Define Config 1" field is
"Config 1". To rename, move the cursor to "Rename" then press
<Enter>. The message below will appear. You can enter up to 16
characters.
To save another configuration, repeat the procedures above but
this time, in the "User Define Config 2" or the fields that follow.
97
Hide quick links:
Advertisement
Table of Contents
