DFI LanParty PRO875B User Manual page 87

3.1.5.17 Time (hh:mm:ss) Alarm
This is used to set the time you would like the system to power-
on. If you want the system to power-on everyday as set in the
"Date (of Month) Alarm" field, the time set in this field must be
later than the time of the RTC set in the Standard CMOS Fea-
tures submenu.
3.1.5.18 Keyboard/Mouse Power On
This field allows you to use the keyboard or PS/2 mouse to
power-on the system.
Disabled
Password
Hot Key
Mouse Left
Mouse Right When this option is selected, double-click the
Keyboard 98 When this option is selected, press the "wake up"
3.1.5.19 KB Power On Password
Move the cursor to this field and press <Enter>. Enter your pass-
word. You can enter up to 5 characters. Type in exactly the same
password to confirm, then press <Enter>.
The power button will not function once a keyboard password
has been set in this field. You must type the correct password to
power-on the system. If you forgot the password, power-off the
system and remove the battery. Wait for a few seconds and in-
stall it back before powering-on the system.
Default setting. Uses the power button to power
on the system.
When this option is selected, set the password
you would like to use to power-on the system in
the "KB Power On Password" field.
When this option is selected, select the function
key you would like to use to power-on the sys-
tem in the "KB Power On Hot Key" field.
When this option is selected, double-click the left
button of the mouse to power-on the system.
right button of the mouse to power-on the sys-
tem.
key of the Windows 98 compatible keyboard to
power-on the system.
BIOS Setup
3
87