DFI LanParty PRO875B User Manual page 30

2
Hardware Installation
4. After powering-on the system, press <Del> to enter the main
menu of the BIOS.
5. Select the Genie BIOS Setting submenu and press <Enter>.
6. Set the "CPU Clock" or "CPU Clock Ratio" field to its default
setting or an appropriate bus clock or frequency ratio. Refer to
the Genie BIOS Setting section in chapter 3 for more
information.
7. Press <Esc> to return to the main menu of the BIOS setup
utility. Select "Save & Exit Setup" and press <Enter>.
8. Type <Y> and press <Enter>.
30