Table of Contents
Advertisement
3
BIOS Setup
3.5 Updating the BIOS
To update the BIOS, you will need the new BIOS file and a flash
utility, AWDFLASH.EXE. You can download them from DFI's web
site or contact technical support or your sales representative.
1. Save the new BIOS file along with the flash utility
AWDFLASH.EXE to a floppy disk.
2. Reboot the system and enter the Award BIOS Setup Utility to
set the first boot drive to "Floppy".
3. Save the setting and reboot the system.
4. After the system booted from the floppy disk, execute the
flash utility by typing AWDFLASH.EXE. The following screen
will appear.
5. Type the new BIOS file name onto the gray area that is next
to "File Name to Program" then press <Enter>.
106
Note:
AWDFLASH.EXE works only in DOS mode.
Award BIOS Flash Utility V.8.15B
(C) Phoenix Technologies Ltd. All Rights Reserved.
(The current BIOS information will appear in this area.)
File Name to Program :
Hide quick links:
Advertisement
Table of Contents
