Universal Serial Bus Ports - DFI LANPARTY UT 915P-T12 User Manual

2
Hardware Installation

2.5.5 Universal Serial Bus Ports

The system board supports 8 USB 2.0/1.1 ports. USB allows data
exchange between your computer and a wide range of
simultaneously accessible external Plug and Play peripherals.
Six onboard USB 2.0/1.1 ports (Black) are at locations CN8 (USB
1-2), CN7 (USB 3-4) and CN12 (USB 5-6) of the system board.
J9 (USB 7-8) allows you to connect 2 additional USB 2.0/1.1 ports.
The USB ports may be mounted on a card-edge bracket. Install the
card-edge bracket to the system chassis then insert the connector
that is attached to the USB port cables to J9.
BIOS Setting
Configure the onboard USB in the Integrated Peripherals submenu
("Onboard Device" section) of the BIOS. Refer to chapter 3 for
more information.
38
USB 2
USB 1
USB 4
USB 3
USB 6
USB 5
2
1
USB 7-8
1 0
9