Chapter 1 - Introduction; Features And Specifications - DFI LanParty PRO875B User Manual

Chapter 1 - Introduction

1.1 Features and Specifications

1.1.1 Features
Chipset
• Intel 875P chipset
®
®
- Intel 82875P Memory Controller Hub (MCH)
®
- Intel 82801ER I/O Controller Hub (ICH5R)
Processor
The system board is equipped with Socket 478 for installing one
of the following supported processors.
® ®
• Intel Pentium
3.2GHz+
- Intel Hyper-Threading Technology
- FSB: 533MHz and 800MHz
® ®
• Intel Celeron
- 400MHz system data bus
Note:
Refer to section 1.2 and appendix A for more information on
the Hyper-Threading Technology.
System Memory
• Supports dual channel (128-bit wide) memory interface
- Each channel supports 2 DIMM sockets
• Supports up to 4GB system memory
• Supports Dynamic mode to optimize system performance
• Synchronous operation with processor system bus
- PC2100/PC2700/PC3200 (DDR266/DDR333/DDR400)
with 800MHz FSB CPU (supports PAT mode). DDR333
will run at 320MHz memory frequency when used with
800MHz FSB CPU.
4 (Prescott and Northwood) processor up to
processor
1
Introduction
7