DFI LanParty PRO875B User Manual page 67

3.1.2.8 RAID or SCSI Card Boot
This field is used to select the RAID device you want to boot.
High Point RAID The drive connected to the RAID IDE con-
ICH5 RAID
PCI SCSI Card The drive connected to the SCSI add-in card
If only one type of interface is connected with RAID device(s),
you don't need to particularly select an option in this field be-
cause the system will automatically detect for the existing drive.
3.1.2.9 USB Flash Disk Type
HDD Emulates the USB flash disk to HDD mode.
Floppy Emulates the USB flash disk to floppy mode.
3.1.2.10 First Boot Device, Second Boot Device, Third Boot Device
and Boot Other Device
Select the drive to boot first, second and third in the "First Boot
Device" "Second Boot Device" and "Third Boot Device" fields
respectively. The BIOS will boot the operating system according
to the sequence of the drive selected. Set "Boot Other Device"
to Enabled if you wish to boot from another device.
3.1.2.11 Swap Floppy Drive
When this field is enabled and the system is booting from the
floppy drive, the system will boot from drive B instead of drive A.
When this field is disabled and the system is booting from the
floppy drive, the system will boot from drive A. You must have
two floppy drives to use this function.
nector.
The drive connected to the SATA connector.
that is installed in a PCI slot.
BIOS Setup
3
67