Using The Dmi Utility - DFI LanParty PRO875B User Manual

4.1.2 Using the DMI Utility

Award DMI Configuration Utility Copyright Award Software Inc, 1996
[Edit DMI] [Add DMI] [Load DMI File] [Save DMI File]
s
BIOS
n
System
Enclosure/Chassis
Processor
Memory Controller
Memory Module
Memory Module
Memory Module
Memory Module
Cache
Cache
Port Connector
Port Connector
Port Connector
Port Connector
Port Connector
Port Connector
Port Connector
s
System Slots
Move cursor ENTER-Accept DEL-Delete ESC-Abort&Exit
The four menus located on top of the DMI Configuration Utility
screen are Edit DMI, Add DMI, Load DMI File and Save DMI File.
Use the or
the Menu bar.
On the left side of the screen is a list of the system configuration
items. Use the
The commands at the bottom of the screen will allow you to navi-
gate through the various setup menus.
Edit DMI
1. Use the
2. Highlight the item on the left screen that you would like to edit
by using the
3. The cursor will move
edit information. The screen will also display the auto-detected
information.
4. Press <F10> to update the edited information into the flash
ROM.
*** BIOS Auto Detect ***
Type : BIOS Information
Handle : 0000
Vendor Name :
BIOS Version :
BIOS Starting Address Segment : E000
BIOS Build Date :
BIOS Characteristics :
Size of BIOS ROM : 0256K
(left or right) arrow keys to select a menu from
or (up or down) arrow keys to select an item.
or arrow keys to select the Edit DMI menu.
or arrow keys, then press <Enter>.
to the screen you select allowing you to
Supported Software
4
109