Irda Connector - DFI LanParty PRO875B User Manual

2.6.7 IrDA Connector

N. C.
VCC
1
Connect your IrDA cable to connector J9 on the system board.
Note:
The sequence of the pin functions on some IrDA cable may be
reversed from the pin function defined on the system board.
Make sure to connect the cable to the IrDA connector
according to their pin functions.
BIOS Setting
Configure IrDA in the Integrated Peripherals submenu ("Onboard
Super IO Device" field) of the BIOS.
Driver Installation
You may need to install the proper drivers in your operating
system to use the IrDA function. Refer to your operating system's
manual or documentation for more information.
IRRX
Ground
IRTX
5
Hardware Installation
2
51