DFI LanParty PRO875B User Manual page 94

3
BIOS Setup
3.1.8.3 CPU Clock Now Is
This field will show the CPU clock based on the settings in the
"CPU Clock" and "CPU Clock Ratio" fields.
3.1.8.4 AGP/PCI/SATA Clock
This field is used to select the bus clock of the AGP, PCI and
SATA.
3.1.8.5 Auto Detect PCI Clk
When enabled, the system will automatically send clock signals to
existing PCI devices.
3.1.8.6 Spread Spectrum
Leave this field in its default setting. Do not alter this setting un-
less advised by an engineer or technician.
3.1.8.7 Current CPU Voltage
This field will show the current CPU voltage.
3.1.8.8 CPU Voltage Control
This field allows you to manually adjust to a higher core voltage
that is supplied to the CPU. If you want to use the CPU's default
core voltage, leave this field in its default setting. The CPU's Vcore
will be generated according to the CPU VID configuration.
94
Important:
Although this function is supported, we do not recommend that
you use a higher voltage because unstable current may be sup-
plied to the system board causing damage.