DFI LanParty PRO875B User Manual page 37

2
Hardware Installation
2.5.4 S/PDIF-in/out Jacks
S/PDIF-in
S/PDIF-out
SPDIF out
Key
GND
VCC
SPDIF in
J4
1 5
The system board is equipped with an onboard S/PDIF-in RCA
jack (red) and a S/PDIF-out RCA jack (yellow) at locations CN20
and CN21 respectively.
The S/PDIF connector at location J4 is for optical S/PDIF cable
connection. Connect the optical audio cable connector of your
S/PDIF module to J4. Make sure pin 1 of the audio cable connec-
tor is aligned with pin 1 of J4.
DO NOT use RCA S/PDIF and optical S/PDIF at the same time.
37