Highpoint Bios Configuration Utility - DFI LanParty PRO875B User Manual

3.4 HighPoint BIOS Configuration Utility

The HighPoint BIOS Configuration Utility is used to configure and
manage RAID on drives connected to the RAID IDE connector.
Important:
Before you run the HighPoint BIOS Configuration Utility, make
sure the "RAID Device Control" field in the Genie BIOS Setting
submenu of the Award BIOS is set to Enabled.
After you power up the system and all hard disk drives have
been detected, the boot ROM message screen will appear as
shown below.
Press the <Ctrl> and <H> keys simultaneously. The BIOS Con-
figuration Utility screen will appear.
Note:
Refer to the "BIOS Configuration Utility" section in the HighPoint
RAID User's Manual for information on using the utility. The
manual is included in the CD.
BIOS Setup
3
105