DFI LanParty PRO875B User Manual page 4

Important Configuration and Driver Installation
Rules
HighPoint RAID IDE Controller
By default, the HighPoint RAID IDE controller is enabled. If you
are not using this function, make sure to set the "RAID Device
Control" field in the Genie BIOS Setting submenu of the Award
BIOS to Disabled.
Make sure to follow the rule mentioned above. Doing it other-
wise will slow down the boot up time and affect the perform-
ance of the system.
Driver Installation Rules
Please follow the installation sequence below.
1. Install the "Audio Drivers".
2. Install the "Intel Chipset Software Installation Utility".
3. Install the other drivers and utilities.
Make sure to follow this sequence. Doing it otherwise will slow
down the boot up time and affect the performance of the sys-
tem.
Notice
This user's manual contains detailed information about the system
board. If, in some cases, some information doesn't match those
shown in the multilingual manual, the multilingual manual should
always be regarded as the most updated version. The multilingual
manual is included in the system board package.
To view the user's manual, insert the CD into a CD-ROM drive.
The autorun screen (Mainboard Utility CD) will appear. Click the
"TOOLS" icon then click "Manual" on the main menu.