Table of Contents
Advertisement
MDA-550/MDA-510
Users Manual
When the test tool is turned off, an active Report is closed
automatically.
For copying or deleting stored reports:
1.
Push
.
SAVE
2.
FILE OPTIONS.
3. Use
to highlight COPY to copy to USB, MOVE
to USB and delete, RENAME to rename the report
name or DELETE to delete the report.
4. Push
.
ENTER
5. Use
to highlight the report.
6. Push
to confirm.
ENTER
Successive saved screens are represented by the last 2
digits in the filename. As an example, when SAVE TO
REPORT is selected for the second time in the Motor Drive
Output, Voltage Modulation, Phase-Phase mode, the
filename is OUVMPP02.PNG.
Table 2 shows the filenames that correspond to the
selected function.
24
FlukeView 2
Refer to the section Connecting to a Computer in the Fluke
190 Series II Users Manual for information about how to
connect the USB cable to a computer.
The setup program of the FlukeView 2 for ScopeMeter Test
Tools is available on the USB drive included with the
Product.
After installation:
1.
Start the FlukeView 2 software.
2. Push HELP to access the documentation for the
program.
Advertisement
Table of Contents
