Brother PE-Design 8.0 Instruction Manual page 223

4
Click , then
And then click points 8 through 10.
9
10
5
Click , then
b
Memo:
By clicking at this point, overlapping
stitching can be prevented.
6
Click , then
And then click points 11 through 12.
12
7
Double-click point 13 (the last point of the
entire pattern), or click point 13 and press the
Enter key.
Basic Font Creator Operations
.
8
.
.
11
13
b
Memo:
To remove the last point that was entered,
click the right mouse button, or press the
BackSpace key.
8
Click , then drag Set Line to adjust the
character width.
Set Line Set Line
Step 3 Creating other font
character patterns
Next, we will create another font character
pattern. For this example, we will create a pattern
for the letter "g".
1
Import file Small_g.bmp in the same way that
"T" was imported.
2
Click the Select Character button, and then
select the character to be created. For this
example, select "g".
221