Checking The Stitching; Viewing Design In The Reference Window - Brother PE-Design 8.0 Instruction Manual

Arranging Embroidery Designs (Layout & Editing)

Checking the stitching

The actual stitching as it will be performed by the
embroidery machine can be viewed using the stitch
simulator.
Toolbar button:
1.
Click , or click Display, then Stitch
Simulator.
The Stitch Simulator dialog box appears,
and the embroidery design is cleared from the
Design Page.
2.
Click to begin the stitching simulation.
b
Memo:
• The slider shows the current location in the
simulation. In addition, the slider can be
moved to change the position in the
simulation.
• To get a better view of the stitching, zoom in
on the design before opening the Stitch
Simulator dialog box.
The following operations can be performed if
the corresponding button is clicked.
: Stops the simulation and returns to the
previous display.
: Temporarily stops the simulation. To
restart the simulation, click
: Drag the slider to adjust the
simulation stitching speed.
: Returns to the beginning of the
previous color.
: Advances to the beginning of the next
color.
66
: Reverses the stitching by the number
of stitches specified in the stitches/
step selector.
: Advances the stitching by the number
of stitches specified in the stitches/
step selector.
*: Returns to the beginning of the design
in the previous hoop section.
*: Advances to the beginning of the
design in the next hoop section.
* Appear only for patterns created on custom-
sized Design Pages.
The numbers indicate the following.
3.
Click in the upper-right corner of the dialog
box to close the dialog box.
b
Memo:
If a pattern was selected when the Stitch
Simulator dialog box was displayed, only the
selected pattern is drawn in the simulation.
Viewing design in the
reference window
A design in the Design Page is displayed in the
Reference Window, giving you an overall view of the
design while you work on a detailed area. The
.
display area frame (red rectangle) indicates the part
of the pattern displayed in the Design Page.
Toolbar button:
To switch between displaying and hiding the
Reference window, click
Reference Window, or press the shortcut key
( ).
F11
Number of the current stitch
Total number of stitches
Number of the color being drawn
Total number of colors used
Pattern section that is displayed
Total number of hoop sections
in the pattern
This indicator appears only
for patterns created on
custom-sized Design Pages.
, click Display, then