Brother PE-Design 8.0 Instruction Manual page 47

Step 3 Printing the positioning
sheet
Print a sheet for aligning the image and the
embroidery.
1
Specify the print settings.
(1) Under Paper and Orientation, select the
appropriate settings for the paper to be
printed on.
(2) Select Print a sheet of paper for
aligning the printed image and the
embroidery.
(1)
(2)
2
Click Print.
3
Specify the appropriate settings in the Print
dialog box, and then click OK.
c
"Printing" on page 143.
→ Printing begins.
b
Memo:
To check the print image, click Print Preview.
Tutorial
(1)
Step 4 Embroidering
1
If an iron-on transfer sheet is used, transfer
the image onto fabric.
b
Memo:
For details on transferring from iron-on
transfer sheets, refer to the instructions for the
iron-on transfer sheets.
2
Hoop the fabric in the embroidery frame.
3
Place the positioning sheet on the fabric to be
embroidered so that it is aligned with the
printed image.
• If the positioning sheet is too large, cut it to
an appropriate size so it can easily be used
for aligning the positions.
• Tape the positioning sheet to the fabric to
secure it in place.
4
Attach the embroidery frame to the
embroidery machine.
Be sure that the positioning sheet does not
move out of place.
45