Brother PE-Design 8.0 Instruction Manual page 137

Arranging Embroidery Designs (Layout & Editing)
b
Memo:
Colors that are crossed out are set to not be
sewn.
3.
Specify the settings for creating the
embroidery pattern.
Sets the horizontal and vertical size of
Cross size
the pattern.
You can select the brand of thread to
use in the created cross stitch pattern. A
user thread chart can also be selected.
Thread Chart
The best corresponding thread colors
from the selected thread chart will be
selected.
Sets the number of colors used in the
created pattern.
Max. The embroidery pattern is created using
Number of no more than the number of colors
Colors specified.
To view the results of the changes, click
Retry.
4.
Click Next.
→ The Edit Cross Stitch dialog box appears.
5.
If necessary, edit the stitches.
1) Selecting stitches to be added/deleted
(cross-stitches): Specifies a cross-
stitch inside a box.
(backstitches): Specifies a back stitch
inside ( or
or ) of a box.
2) Selecting the thread color to be specified
The currently selected color appears below
Color Option.
To change the color, click Change Color to
display the Thread Color dialog box, and
then click the desired color.
To select the color to be used for a stitch,
click , and then click the stitch to be
sewn with that color.
) or on the edge (
3) Clicking/dragging to add/delete stitches
♦ For cross-stitches
Clicking a box: Adds one stitch.
♦ For backstitches
Clicking an edge of a box: Adds one
stitch at the edge.
Clicking a diagonal line in a box: Adds
one stitch on the diagonal.
♦ For both cross-stitches and backstitches
Dragging the pointer: Adds consecutive
stitches.
Right-clicking/dragging with the right
mouse button held down: Deletes one
stitch/deletes consecutive stitches.
a
Note:
If Previous is clicked to return to the
previous dialog box after the stitches have
been edited, the edited stitches are reset to
their previous arrangement.
b
Memo:
• To display the image enlarged (or reduced),
move the ZOOM slider up (or down).
• To display the template, click Display
Template.
6.
Under Cross Stitch Times and Backstitch
Times, specify the number of times each
stitch is sewn.
Select Single, Double or Triple.
7.
After selecting the desired settings, click
Finish.
→ The cross stitch pattern is created and
displayed in the Design Page.
→ The image is automatically hidden.
135