Brother PE-Design 8.0 Instruction Manual page 225

8
Click , then
And then click points 30 though 34.
34
33
9
Click , then
Next, click points 35 though 44, and then
double-click point 45 (end point), or click point
45 and press the Enter
35
38
36
37
39
10
Drag Set Line to adjust the character width.
Set Line
Basic Font Creator Operations
.
30
31
32
.
key.
44 45
42
40
43
41
Step 4 Save the font character
pattern
1
Click File, then Save.
2
Select the MyFont folder in the folder where
PE-DESIGN was installed. (For example,
clicking the drive where PE-DESIGN was
installed, then Program Files, then Brother,
then PE-DESIGN 8, then MyFont) And then
type in the file name. For this example, type in
the name "My font1".
Click Save.
a
Note:
Save the font created in the location below.
The font will not be usable in the Layout &
Editing if it's stored in a different folder.
For example, (Drive where PE-DESIGN
was installed) \Program Files\Brother\
PE-DESIGN 8\MyFont.
223