Brother PE-Design 8.0 Instruction Manual page 212

Creating Custom Stitch Patterns (Programmable Stitch Creator)
2.
Click the broken line.
→ The points in the broken line appear as
small white squares.
b
Memo:
You can only select one broken line at a time.
3.
To edit a point, click the point to select it.
→ The selected point appears as a small
black square.
• To move the point, drag it to the new
location.
→ All of the selected points move in the
same direction.
• To insert a point, click the line to add a new
point.
→ A new point appears selected (as a small
black square).
• To delete the point, click Edit, then Delete,
or press the
Delete
point.
b
Memo:
If a line is composed of two points and you
delete one of them, the entire line is deleted.
b
Memo:
• To select multiple points, hold down the
key while clicking the points, or
Ctrl
dragging the pointer over the points.
• Hold down the
Ctrl
key or
direction changes to the end or start point.
• Hold down the
Shift
points. The points are moved horizontally or
vertically.
• Press an arrow key. The points move in the
direction of the arrow on the key.
210
key to remove the
key while pressing the
key. The selection
key while dragging the