Brother PE-Design 8.0 Instruction Manual page 105

Arranging Embroidery Designs (Layout & Editing)
Fill stitch
Under
sewing
c
"Satin stitch" on page 101.
Density
Direction
Specify the shape of the returning ends of the stitching.
Stitch
This cannot be specified if the sewing direction is set to
Type
variable.
Half Stitch
c
"Half Stitch" and "Running Stitch Path" on page 102.
Running
Stitch Path
Step pitch Specify the stitching pitch (length of one stitch).
Frequency Specify the shift in the stitches.
Pull
c
compen- "Pull compensation" on page 102.
sation
Programmable fill stitch
Under sewing
Density
Direction
Half Stitch
Running Stitch Path
Pull compensation
c
"Region sewing attributes" on page 101 and 102.
Short Long
0% 50%
103