Changing The Image Settings; Images - Brother PE-Design 8.0 Instruction Manual

Arranging Embroidery Designs (Layout & Editing)

Changing the Image Settings

Changing the display of the
background image
The image that remains in the work area can be
displayed or hidden, or a faded copy of the image
can be displayed.
1.
Click Image, then Display Image, and then
select the desired setting.
• To display the original image, click On (100%).
• To display a faded copy of the image, click the
desired density (75%, 50% or 25%).
• To hide the original image, click Off.
b
Memo:
Press the shortcut key (
between displaying the image (On (100%)) to
displaying it faded at each density (75%, 50%
and 25%) to hiding the image (Off).
Changing the size, angle
and position of the image
The size, angle and position of the image can be
adjusted.
1.
Click Image, then Modify.
→ A red line and handles appear around the
image.
b
Memo:
The status bar shows the dimensions (width
and height) of the image.
) to switch
F6
Moving an image:
1.
Move the pointer over the image.
2.
Drag the image to the desired location.
Scaling an image:
1.
Move the pointer over one of the handles.
2.
Drag the handle to adjust the image to the
desired size.
b
Memo:
If the key is held down while a handle is
Shift
dragged, the image is enlarged or reduced
from the center of the image.
Rotating an image:
An image can be rotated in 90-degree increments.
1.
Click Image, then Rotate. Select 90 Degrees
Clockwise or 90 Degrees
Counterclockwise.
→ The image is rotated in the specified
direction.
Deleting an image:
1.
Press the Delete key, or click Edit, then
Delete.
→ The image will be deleted from the Design
Page.
123