Brother PE-Design 8.0 Instruction Manual page 136

Arranging Embroidery Designs (Layout & Editing)
Color Option
Color
You can select the brand of thread to
use with the Color Set function. The
colors will be selected automatically
Thread Chart
correspond with the Color Set selection.
A user thread chart can also be
selected.
If Auto Select is selected, the most
appropriate four colors will automatically
be selected. Selecting a different option
specifies the four colors used when
creating the embroidery pattern.
The color choices are: cyan (C),
Color Set magenta (M), yellow (Y), black (K), red
(R), green (G) and blue (B). Select one
of the following combinations that
contains the colors most used in the
image.
Color combinations: CMYK, RGBK,
CRYK, BMYK
Thread
Displays the four selected thread colors.
Colors Used
In Thread Colors Used click on the
color. Then click on Change Color to
open the Thread Color dialog box.
Change
Select the new color and click OK. You
Color
will see the color change within the photo
in the preview box within the Photo
Stitch 2 Parameters dialog.
Mono
Click on the Change Color button to
open the Thread Color dialog box if you
wish to change the color of the photo
Change
stitching. You can also change the
Color
brand of thread you wish to sew with.
Select the color and click OK to make
the color change.
Color/Mono
The top slider is used to adjust the
brightness. Move the slider to the right
to increase the brightness or to the left
to decrease the brightness. The bottom
Brightness /
slider is used to adjust the contrast.
Contrast
Move the slider to the right to increase
the contrast or to the left to decrease
the contrast. Click on Update Preview
to see the changes made.
Click this button to update the
Update
previewed image after settings have
Preview
been changed.
134
Automatically converting an image to
a cross stitch pattern (Cross Stitch)
A tutorial describing basic operations is also
available.
c
"Cross Stitch Function" on page 27
■
If Cross Stitch (Color) is selected
1.
In the image in the dialog box, click the areas
to select whether or not they are to be sewn.
b
Memo:
• Areas not set to be sewn are shown filled
with a crosshatch pattern.
• To adjust the zoom ratio that the image is
displayed in, move the slider between
and .
2.
If necessary, in the Omit Colors list, click the
colors to select whether or not they will be sewn.
These areas
will not be sewn.