Brother PE-Design 8.0 Instruction Manual page 41

6
Click Finish.
→ An embroidery pattern of the tulip is
created.
Step 2 Adding text and adjusting
character spacing
1
Click , then
of the tulip.
2
From the keyboard, type in "Tulip", and then
click OK.
→ The text is entered.
Tutorial
. Click the bottom edge
3
Click , then
4
Click the text, and then click the lower-left
point of "p".
5
Place the pointer over "p" so that the shape of
the pointer changes to
the character to the right to adjust the
character spacing.
In the same way, move points of other
characters to adjust the overall character
spacing.
.
, and then drag
39