Workgroup Features - Altigen AltiServ User Manual

Remote Call #37 <your
Forwarding ext>
<pass-
word>
a <ext> = extension num.; <nn> = 2-digit num.; <loc.> location num.; <destina-
tion> = extension or complete phone number

Workgroup Features

Feature
Workgroup
Call Pickup
Outbound Workgroup
Workgroup Log In
Multiple Workgroup
Log In
Workgroup Log Out
Multiple Workgroup
Log Out
Status Ready
Status Not Ready
a <wg ext> = workgroup extension number.
16 AltiServ User Guide
When you're on a telephone station other than
your own, forwards your calls to the current sta-
tion. Multiple users can forward to the same
extension. Deactivate it by pressing #37 again on
the same phone set.
a
Dial Description
#29 Pickup incoming calls for your work-
<wg ext> group and ignore other calls coming into
the system.
#53 Set the workgroup to associate outbound
calls to.
#54 For workgroup members only: Logs in to
<wg ext> a workgroup.
#54 + 0 + For workgroup members only: Logs in to
<wg ext 1> multiple workgroups.
+ # + <wg
ext 2> + #
etc.
#56 Log out and block workgroup calls but
<wg ext> receive other calls at your extension.
#56 + 0 Log out from all workgroups and block
workgroup calls but receive other calls at
your extension.
#90 Tells the system your extension is ready
to receive workgroup calls. This can be
used to end a call Wrap Up Time delay.
#91 Tells the system not to route workgroup
calls to this extension.