Conference Calls; Using A Client Application With A Mobile Extension - Altigen AltiServ User Manual

Conference Calls

You can place conference calls that include up to 5 parties, and you can
speak privately with each party before adding them to the conference call.
To conference an outgoing call:
1. Press the * key.
2. At the dial tone, dial the next party's phone number.
3. Wait for the third party to answer, and announce the conference call.
4. Press # to put all three parties into the conference call.
If you are using AltiView/AltiAgent, and you initiated the conference call,
you can select another conference member and drop that member from the
conference simply by disconnecting the call.
To conference an incoming call:
1. When you hear a call waiting tone, press the * key to connect to the
incoming call.
2. Press # to add the caller to the conference.
If Multiple Call Waiting is set for the extension, conferencing an
incoming call must be done through AltiView/AltiAgent. If only Single
Call Waiting is set, both AltiView/AltiAgent and the phone itself can be
used to conference an incoming call.

Using a Client Application with a Mobile Extension

You can use AltiView/AltiAgent to handle mobile extension calls the same
way you would to handle stationery extension calls. See the AltiView
Manual and AltiAgent Manual.
22 AltiServ User Guide