Ansi Vt510 Emulation - Neoware c50 - Thin Client User Manual

Host Command Summary

ANSI VT510 Emulation

When running the VT510 emulation, the following commands will be executed in
addition those listed for ANSI VT100 and VT500.
USER-DEFINED KEYS
Download definitions for user-defined keys
*c 0 or none
1
*l 0 or none
1
*m 0, 2 or none Defines the shifted function key.
1
3
4
| (vertical bar) The final character. Key definition strings follow and these
D...D are the key definition strings in the following format:
Key1/UDS/UDS Direction;Key2/UDS/UDS Direction;........;
Key# Is the key selection number of the key to be defined as listed below:
/ Is a delimiter.
UDS
UDS Direction Specifies the transmission direction:
C-12
Clear all keys before loading new values (0 is default).
Load new UDK values; clear old values only when redefined.
Lock the keys.
Do not lock the keys against future redefinition.
Defines the unshifted function key.
Defines the alternate unshifted function key.
Defines the alternate shifted function key.
are terminated by ST.
F1 11
F2 12
F3 13
F4 14
Is the user-defined string consisting of hex pairs in the
following ranges:
3/0 through 3/9 (0 through 9)
4/1 through 4/6 (A through F)
6/1 through 6/6 (a through f)
For example, the hex encoding for "PRINT" would be
as follows: 5 0 5 2 4 9 4 E 5 4
This enables you to use any of the 256 character codes in the
key string. You can enter key definition strings in any order.
0 or none Normal (Host and/or terminal) default
1 Local (Terminal only)
2 Remote (Host only)
DCS *c ; *l ; *m | D...D ST
F5 15
F6 17
F7 18
F8 19
F9 20
F10 21
F11 23
F12 24