Neoware c50 - Thin Client User Manual page 50

Getting Started
CE - Direct Print Data To A Network Printer
To direct print data to a printer on the network when running Windows CE, select Use
Network Printer (LPR) and enter the LPD Hostname. Clicking the Configure
button will display a dialog box which enables you to specify various print settings.
You must specify the Printer Name. The Job Name and User Name entries are
optional (the User Name will default to root if none is specified). The Number of
Copies to print is set to 1 by default. You can specify how many times the LPR
protocol will attempt to execute the print job before cancelling by setting the number
of Retries and the number of seconds delay between each attempt. When Add Banner
is selected, information about this print job will be printed with it. You can display a
message box which will indicate the progress of the print job by selecting Debug
Information.
If supported, clicking the Advanced button will display a dialog box that enables you
to send printer-specific commands to specify, for example, font size, colour, or page
header and footer.
2-34