Notice Board Setup - Neoware c50 - Thin Client User Manual

Setup Menus

Notice Board Setup

This dialog box is displayed by clicking the Notice Board Setup button in the IBM
3270 Settings dialog box, or by pressing the keys Alt + F2. Refer to the Notice Board
Facility section in the IBM 3270 Emulation chapter for information on how to use the
Notice Board.
Notice Board Enabled
Factory default: Unselected
When this option is selected, pressing the Zoom key will toggle the display between
full screen (i.e. the screen currently containing the cursor) and split screen (host screen
and Notice Board) mode. The following Zoom Settings options determine which is
displayed above the other. Note that the host screen contains the same number of rows
and columns whether displayed full screen or in split screen.
Zoom Settings
Factory default: Below Host
These toggle settings determine whether the Notice Board is displayed above or below
the host screen. When viewing the display, pointers at each end of the dividing line
between the two screens indicate which is the host screen.
Copy to F-Key Enabled
Factory default: Unselected
This enables the facility for copying screen data to a function key. Refer to the
Copying Screen Data To A Function Key section in the IBM 3270 Emulation chapter
for details.
6-54