Neoware c50 - Thin Client User Manual page 174

Setup Menus
Screen Mapping
Factory default: 1024 (x) by 768 (y)
This option enables you to select the correct resolution for screen addressing when in
Tek 4014 or Westward 2119 graphics modes.
For Tek 4014 mode select 1024 (x) by 768 (y) resolution (default).
For Westward 2119 mode select 1024 (x) by 784 (y) resolution.
Gin Terminators
Factory default: ^M^D (i.e. CR EOT)
This option enables you to specify the termination character(s) that follow a GIN
address transmission. A maximum of 6 characters can be entered.
To change the current definition, delete the definition displayed in the text box and
type in the new one, either as the control key character equivalent or the decimal value
of the ASCII character(s).
For example, the ASCII character CR can be entered by typing the characters ^
and M, representing the keys Ctrl + M which, when pressed together would generate
the CR code.
Decimal values are entered as three-digit numbers immediately preceded by an
underscore character. Values with only two digits must be preceded by a zero. For
example, the decimal value of CR is 13, so this would be entered as _013.
6-90