Aux Port Settings - Neoware c50 - Thin Client User Manual

Getting Started

Aux Port Settings

The Aux Port Settings dialog box enables you to specify a COM or LPT port for
bidirectional output when in any DEC VT mode, ANSI BBS, Sco Console, HP 700-
92/96 or IBM 3151 mode.
The Functionality options enable you to set the auxiliary port as bidirectional and
specify that it is to be opened at start-up.
Clicking the Configure button will display a dialog box in which you can specify
settings for the COM port. The options in it are described in the Serial Settings section
earlier in this chapter.
2-38