Disable Backing Store; Enable Plane Masking; Disable Sixel Graphics Scaling - Neoware c50 - Thin Client User Manual

Disable Backing Store

Registry Entry: BackingStore = "off"
Command Line: -B
Default Setting: on
Only applicable to versions of TeemTalk that support graphics emulations.When
TeemTalk is in ReGIS mode it automatically stores a copy of graphics data in memory
when graphics are initially drawn by the host in the window, a feature known as
'backing store'. This enables graphics to be redrawn quickly from local memory when
the TeemTalk window is uncovered after being obscured by other windows, or when
the window is restored or maximized from an iconized state. The backing store feature
can be disabled so that graphics data sent from the host can be drawn up to 50% faster.

Enable Plane Masking

Registry Entry: PlaneMasking = "on"
Command Line: -PM
Default Setting: off
Only applicable to versions of TeemTalk that support ReGIS mode. When TeemTalk
is in ReGIS mode and you are using an application that uses multiple surfaces, you can
use this command to enable TeemTalk to support them. Note that your PC must have a
display adaptor that supports 256 colour mode and your system must be running in
this mode in order for multiple surfaces to be supported.

Disable Sixel Graphics Scaling

Registry Entry: ScaleSixels = "off"
Command Line: -Y
Default Setting: on
Only applicable to versions of TeemTalk that support graphics emulations. By default
the ReGIS sixel graphics display of 800x400 (world coordinates) is automatically
scaled to fit the current size of the TeemTalk window. This command will prevent
scaling of the image and cause the right and bottom edges of the image to be clipped to
fit the window if it is too big.
Initialization Commands
20-19