Neoware c50 - Thin Client User Manual page 51

Getting Started
XPe - Direct Print Data To A Network Printer
To direct print data to a printer on the network when running Windows XPe, select
Use Network Printer (LPR) and enter the LPD Hostname. Clicking the Configure
button will display a dialog box which enables you to specify various print settings.
You must specify the Printer Name. The Job Name and User Name entries are
optional (the User Name will default to root if none is specified). You can specify
how many times the LPR protocol will attempt to execute the print job before
cancelling by setting the number of Retries and the number of seconds delay between
each attempt.
Clicking the Advanced button will display a dialog box that enables you to send
printer-specific commands to specify, for example, font size, colour, or page header
and footer. When Add Banner is selected, information about this print job will be
printed with it. You can display a message box which will indicate the progress of the
print job by selecting Debug Information.
2-35