The Status Bar - Neoware c50 - Thin Client User Manual

5. When you have specified the required settings in the New Connection dialog
box, click the Connect button to make the connection.
Note: You can save these settings as a connection template using
the Save Session As dialog box. Refer to the Setup Menus
chapter for details.

The Status Bar

The status bar along the bottom of the display shows the status of various operations.
Field 1:
(rrr,ccc)
Field 2:
INSERT
pressed or when the Insert Character command is received. Note that the
message will not be displayed if the Insert Character option is not set
to Mode. Insert mode is exited by pressing the Insert or Reset key.
Field 3: Indicates the current operating mode.
In BLOCK
locally, allowing you to edit it before a block of data is sent to the host.
In CHAR
and the display.
In ECHO
is then responsible for returning the data to the display.
Field 4:
HOLD SCREEN
suspend screen update. Press Hold Screen again to enable screen up-
date.
INVALID KEY
KEYS LOCKED
unlocked when the Keyboard Unlock command is received or when the
Cancel key is pressed.
NUMERIC
PRINTING
SENDING
WRONG PLACE
field or field attribute character position. It is also displayed when you
1 2 3
indicates the current row and column position of the cursor.
indicates that Insert mode is active when the Insert key is
mode, keyboard entered data is displayed and processed
mode, keyboard entered data is sent simultaneously to the host
mode, keyboard entered data is sent only to the host. The host
indicates that the Hold Screen key has been pressed to
appears when you press an invalid key.
appears when the keyboard is locked. The keys will be
indicates the cursor is located in an unprotected numeric field.
indicates that data is being sent to the printer.
indicates that data is being sent to the host.
appears when you press an invalid key in a protected
IBM 3151 Emulation
4
13-3